沼氣發電機組具有啟停迅速、運行靈活、運行效率高和清潔環保等技術優勢，是我國電力能源生產的重要組成部分。重型發電用沼氣發電機組技術先進，設備更新迭代比較快，隨著國家重大專項研究的實施，已逐步形成完善的燃機自主研發和設計體系，燃機關鍵技術國產化進程迅速。為了加快集團公司燃氣發電事業發展，提高燃機管理水平，亟需結合集團燃氣發電項目發展實際，制定一部燃氣發電項目機組選型和技術路線選擇的管理文件。

　　Biogas generator sets have technological advantages such as rapid start stop, flexible operation, high operating efficiency, and clean environmental protection, and are an important component of China's power energy production. The biogas generator set for heavy-duty power generation has advanced technology and rapid equipment updates and iterations. With the implementation of major national special research projects, a complete independent research and design system for gas turbines has gradually been formed, and the localization process of key technologies for gas turbines is rapidly advancing. In order to accelerate the development of the gas power generation business of the group company and improve the management level of gas turbines, it is urgent to develop a management document for the selection of gas power generation project units and technical routes based on the actual development of the group's gas power generation projects.

　　一、總則

　　I. General Provisions

　　1.燃氣發電項目機組選型和技術路線選擇應遵循以下主要原則。

　　The selection of units and technical routes for gas-fired power generation projects should follow the following main principles.

　　1.1符合政策原則。符合國家、行業強制性標準要求，符合相關規范,符合國家或地方的產業政策。

　　1.1 Compliance with policy principles. Comply with mandatory national and industry standards, relevant regulations, and national or local industrial policies.

　　1.2提高效率原則。燃機技術指標先進，在安全可靠、經濟環保的前提下，著力提高機組運行效率。

　　1.2 Principle of improving efficiency. The technical indicators of the gas turbine are advanced, and efforts are made to improve the operating efficiency of the unit on the premise of safety, reliability, economy, and environmental protection.

　　1.3重點突出原則。突出反映節能減排、保護環境，建設資源節約型和環境友好型燃機電廠，體現最新科技成果。

　　1.3 Emphasis on key principles. Highlight energy conservation, emission reduction, environmental protection, and the construction of resource-saving and environmentally friendly gas turbine power plants, reflecting the latest technological achievements.

　　1.4效益優先原則。簡化系統和流程，減少系統和設備裕度，合理控制建設標準，突出提高投資收益的目的。

　　1.4 Principle of prioritizing benefits. Simplify systems and processes, reduce system and equipment margins, reasonably control construction standards, and highlight the goal of improving investment returns.

　　1.5國產化原則。降低燃氣發電項目的建設成本，提高服務質量。在滿足安全經濟的條件下，優先選擇國產化率較高的沼氣發電機組。

　　1.5 Localization principle. Reduce the construction cost of gas-fired power generation projects and improve service quality. Priority should be given to selecting biogas generators with a higher domestication rate, while ensuring safety and economic conditions.

　　1.6注重特色原則。積極推廣應用新技術，大力支持技術創新和智慧電廠建設，建設高質量具有大唐特色的燃機電廠。

　　1.6 Emphasize the principle of distinctive features. Actively promote the application of new technologies, vigorously support technological innovation and the construction of smart power plants, and build high-quality gas turbine power plants with Datang characteristics.

　　2.燃機項目機組選型應符合《燃氣-蒸汽聯合循環電廠設計規定》（DL/T5174）等國家和行業的有關規定和標準等相關文件要求。

　　2. The selection of gas turbine project units should comply with relevant national and industry regulations and standards such as the "Design Regulations for Gas Steam Combined Cycle Power Plants" (DL/T5174).

　　二、通則

　　2、 General rules

　　1.燃氣發電項目建設一般由省級能源主管部門或地方政府進行核準，機組選型應結合地方熱電聯產等相關產業政策，了解地方天然氣發電電價補償和其他鼓勵措施，根據地方能源需求和發展趨勢對燃機機型、容量和類型進行合理選擇。

　　1. The construction of gas-fired power generation projects is generally approved by the provincial energy regulatory department or local government. The selection of units should be based on local industrial policies such as cogeneration, understanding of local natural gas power generation electricity price compensation and other incentive measures, and making reasonable choices of gas turbine models, capacities, and types according to local energy demand and development trends.

　　2.所有的燃氣發電項目選型和技術路線選擇都要認真開展主輔機設備的調研工作，充分參考國內外先進的燃機建設案例，把系統擬定和設備選型優化貫穿于工程建設的全過程、全方位，把集團公司提高效率、降低造價的各項措施落實在機組選型和技術路線過程中。

　　2. All gas power generation project selection and technical route selection should carefully conduct research on main and auxiliary equipment, fully refer to advanced gas turbine construction cases at home and abroad, integrate system formulation and equipment selection optimization throughout the entire process and all aspects of engineering construction, and implement various measures of the group company to improve efficiency and reduce costs in the process of unit selection and technical route.

　　3.燃機設備選型應考察其技術的先進性、產品的成熟性和穩定性，同時兼顧蒸汽系統設備的合理匹配，力求組成燃氣-蒸汽聯合循環的經濟性達到最優，運行維護成本最低。

　　3. For the selection of gas turbine equipment, the progressiveness of its technology, the maturity and stability of its products shall be investigated, and the reasonable matching of steam system equipment shall be taken into consideration, so as to achieve the best economy and the lowest operation and maintenance cost of the gas steam combined cycle.

　　4.燃氣發電項目技術路線和設備選型選擇應考慮工廠建設、運行維護全生命周期管理，采用先進的工程管理方法，提高電廠智能化水平，提高管理效率。

　　4. The selection of technical routes and equipment for gas-fired power generation projects should consider the full lifecycle management of factory construction, operation and maintenance, adopt advanced engineering management methods, improve the intelligence level of power plants, and enhance management efficiency.

　　5.燃氣發電項目輔機設備選型應充分考慮與燃機設備的匹配性，根據電熱負荷實際綜合測算結果，確定輔機設備的形式和系統組成，確保整體的安全經濟性達到最優。

　　5. The selection of auxiliary equipment for gas power generation projects should fully consider the compatibility with gas turbine equipment. Based on the actual comprehensive calculation results of electric and thermal loads, the form and system composition of the auxiliary equipment should be determined to ensure the optimal overall safety and economy.

　　6.優先選擇經濟技術指標先進的燃機，綜合考慮調峰、供熱能力和其他因素后進行評估，合理選擇H級、F級或其他級別的燃機設備。

　　6. Prioritize the selection of gas turbines with advanced economic and technological indicators, evaluate them comprehensively based on peak shaving, heating capacity, and other factors, and reasonably choose H-class, F-class, or other levels of gas turbine equipment.

　　7.機組滿足調峰要求以及熱負荷需求前提下，根據國家相關政策因地制宜選擇機組容量，并根據區域熱負荷發展的實際情況和相關規劃等考慮熱電負荷裕量。

　　7. Under the premise that the unit meets the requirements of peak shaving and heat load demand, the unit capacity shall be selected according to relevant national policies, and the thermal power load margin shall be considered based on the actual situation of regional heat load development and relevant planning.

　　8.燃氣發電項目建設需充分考慮燃機設備運行維護的后期投入和相關技術改進等問題，降低備品備件的采購費用，提高技術服務質量。

　　8. The construction of gas-fired power generation projects should fully consider the later investment in the operation and maintenance of gas turbine equipment and related technical improvements, reduce the procurement cost of spare parts, and improve the quality of technical services.

　　9.對于按電網要求配套黑啟動功能的燃機項目，應設計安裝足夠容量的柴油發電機、儲能蓄電池等設備，保證機組能夠在特殊情況下正常啟動。

　　For gas turbine projects that are equipped with black start function according to the requirements of the power grid, sufficient capacity diesel generators, energy storage batteries and other equipment should be designed and installed to ensure that the unit can start normally under special circumstances.

　　三、技術路線選擇

　　3、 Technical route selection

　　燃氣發電具有清潔環保、占地面積緊湊等優勢，多建設在城市近郊，在滿足電負荷的需求的同時滿足對周邊居民采暖和工業區的供熱需求。沼氣發電機組按供能種類分為熱電聯產機組、調峰機組和分布式機組等類型。

　　Gas power generation has the advantages of being clean and environmentally friendly, and occupying a compact area. It is mostly built in the suburbs of cities to meet the heating needs of surrounding residents and industrial areas while meeting the demand for electricity load. Biogas power generation units are divided into types such as cogeneration units, peak shaving units, and distributed units according to the type of energy supply.

　　1.熱電聯產機組

　　1. Cogeneration unit

　　1.1燃氣熱電聯產項目應符合《熱電聯產管理辦法》（發改能源〔2016〕617號）文件的各項要求。

　　1.1 Gas cogeneration projects should comply with the requirements of the "Management Measures for Cogeneration of Heat and Power" (NDRC Energy [2016] No. 617) document.

　　1.2根據項目所在地域范圍電力、熱力供應需求，選擇容量匹配的燃機。

　　1.2 Select gas turbines with matching capacity based on the electricity and heat supply demand within the project's geographical area.

　　1.3采用高效率的燃氣－蒸汽聯合循環機組，充分利用能源，降低供熱供電成本。

　　1.3 Adopt high-efficiency gas steam combined cycle units to fully utilize energy and reduce heating and power supply costs.

　　1.4對于供熱機組，爭取以熱定電的相關政策，根據國家相關政策因地制宜選擇機組容量。

　　1.4 For heating units, strive for relevant policies of using heat to determine electricity, and select unit capacity according to local conditions based on national policies.

　　1.5采暖和工業供熱機組宜根據熱負荷需求合理選擇背壓、抽凝或汽輪機中間級抽汽供熱方式。

　　1.5 Heating and industrial heating units should choose back pressure, extraction condensing, or intermediate stage extraction steam heating methods according to the heat load demand.

　　1.6機組選型匹配熱負荷需求，并充分考慮區域發展實際，合理估算供熱裕量，綜合考慮供熱的安全可靠。

　　1.6 Unit selection should match the heat load demand, fully consider the actual development of the region, reasonably estimate the heating margin, and comprehensively consider the safety and reliability of heating.

　　1.7采暖供熱機組應選擇具備較高安全可靠性的燃機及配套設備，熱電比應滿足相關政策要求。

　　1.7 Heating units should choose gas turbines and supporting equipment with high safety and reliability, and the thermoelectric ratio should meet relevant policy requirements.

　　1.8機組宜選擇標準系列產品，具有高可靠性及可用率，提高設備的國產化率，降低初投資及運營成本。

　　1.8 Units should choose standard series products with high reliability and availability, improve the localization rate of equipment, and reduce initial investment and operating costs.

　　1.9滿足環境保護要求，優先選擇具有低NOx排放和低噪音污染的機型。

　　1.9 Meet environmental protection requirements and prioritize selecting models with low NOx emissions and low noise pollution.

　　1.10擴展方便，結合遠期熱負荷發展，有利于分期建設。

　　1.10 Easy expansion, combined with long-term heat load development, is conducive to phased construction.

　　2.燃機調峰機組

　　2. Gas turbine peak shaving unit

　　2.1根據電網調峰要求合理選擇機組容量，并根據項目區域的經濟發展考慮一定的裕量。

　　2.1 Reasonably select the unit capacity according to the peak shaving requirements of the power grid, and consider a certain margin based on the economic development of the project area.

　　2.2機組技術先進、經濟合理、成熟可靠、調節靈活。

　　2.2 The unit is technologically advanced, economically reasonable, mature and reliable, and has flexible regulation.

　　2.3采用高效率的燃氣－蒸汽聯合循環機組，充分利用能源，降低供電成本。

　　2.3 Adopt high-efficiency gas steam combined cycle units to fully utilize energy and reduce power supply costs.

　　2.4機組具備快速啟停的能力，優先選擇升降負荷率較高的機組設備。

　　2.4 The unit has the ability to quickly start and stop, and priority should be given to selecting equipment with higher load lifting rates.

　　2.5機組具備平緩的負荷效率性能曲線，在調峰負荷范圍內具有較高的運行效率。

　　The 2.5 unit has a smooth load efficiency performance curve and high operating efficiency within the peak load range.

　　2.6機組選擇標準系列產品，具有高可靠性及可用率，提高設備的國產化率，降低初投資及運營成本。

　　2.6 Select standard series products for the unit, which have high reliability and availability, improve the localization rate of equipment, and reduce initial investment and operating costs.

　　2.7滿足環境保護要求，優先選擇具有低NOx排放和低噪音污染的機型。

　　2.7 Meet environmental protection requirements and prioritize selecting models with low NOx emissions and low noise pollution.

　　3.分布式燃氣電站

　　3. Distributed gas power station

　　3.1主機容量的選擇應依據“以熱（冷）定電，熱（冷）電平衡的原則”，根據分布式能源站所在區域的熱（冷）負荷的特性和大小合理確定。

　　3.1 The selection of host capacity should be based on the principle of "determining electricity based on heat (cold) and balancing heat (cold) electricity", and reasonably determined according to the characteristics and size of the heat (cold) load in the area where the distributed energy station is located.

　　3.2應綜合考慮供熱（冷）安全可靠，機組調節靈活，技術上經濟上先進合理。

　　3.2 Heating (cooling) safety and reliability, flexible unit adjustment, and advanced and reasonable technology and economy should be comprehensively considered.

　　3.3根據分布式電站的電、熱（冷）容量合理選擇中、小、微型燃氣輪機或內燃機。

　　3.3 Reasonably select medium, small, and micro gas turbines or internal combustion engines based on the electrical and thermal (cooling) capacity of distributed power stations.

　　3.4盡可能選用效率高、起動快的機組，以充分利用能源，降低供熱（冷）供電價格。

　　3.4 Choose units with high efficiency and fast start-up as much as possible to fully utilize energy and reduce the price of heating (cooling) power supply.

　　3.6滿足環境保護要求，優先選擇具有低NOx排放和低噪音污染的機型，具有較好的技術、價格優勢。

　　3.6 Meet environmental protection requirements and prioritize selecting models with low NOx emissions and low noise pollution, which have good technological and price advantages.

　　3.7合理利用綠色能源，經濟性論證合理時，可考慮同步規劃建設光伏多能互補、儲能等。

　　3.7 Reasonable utilization of green energy. When the economic feasibility is reasonable, synchronous planning and construction of photovoltaic multi energy complementarity, energy storage, etc. can be considered.

　　四、燃機設備選型

　　4、 Selection of gas turbine equipment

　　（一）燃機選型注意事項

　　（1） Precautions for gas turbine selection

　　1.燃機選型應滿足適用性原則，燃機設備選型應充分參考燃機的發電容量與所需負荷的匹配，合理選擇單套機組負荷和臺數，保證帶負荷能力滿足要求，并留有后期負荷發展的裕量。

　　1. The selection of gas turbines should adhere to the principle of applicability, and the selection of gas turbine equipment should fully consider the matching between the power generation capacity of the gas turbine and the required load. The load and number of individual units should be reasonably selected to ensure that the load carrying capacity meets the requirements and leave room for future load development.

　　2.對于供熱機組，燃機設備選型應兼顧配套汽輪機的抽汽供熱能力，保證汽輪機的抽汽或排汽能夠滿足熱用戶的需求，并對后期熱負荷發展留有足夠的裕量。

　　2. For heating units, the selection of gas turbine equipment should take into account the extraction and heating capacity of the supporting steam turbine, ensuring that the extraction or exhaust of the steam turbine can meet the needs of heat users and leave sufficient margin for the later development of heat load.

　　3.調峰用燃機機型選擇要關注燃機的啟動技術特性，如燃機的啟動時長、帶滿負荷時長，停機時長等因素。兼顧負荷變動特性，如具有較高的升、降負荷率，滿足兩個細則規定要求。

　　3. The selection of gas turbine models for peak shaving should pay attention to the starting technical characteristics of the gas turbine, such as the starting time, full load duration, shutdown time, and other factors. Taking into account the characteristics of load fluctuations, such as having a high rate of load increase and decrease, and meeting the requirements of the two detailed regulations.

　　4.在需求發電容量初步確定的情況下，應在綜合考慮現場邊界條件的前提下，按燃機綜合性能梯度選擇燃氣機組。

　　4. In the preliminary determination of the required power generation capacity, gas turbines should be selected according to the comprehensive performance gradient of the gas turbine, taking into account the on-site boundary conditions comprehensively.

　　5.在燃機選型中應滿足燃機的電、熱的負荷適應能力，保證燃機全負荷段、尤其是常用負荷下有較高的運行效率。在燃機運行的常用負荷段，燃機應能維持低熱耗、高效率工況運行。

　　5. In the selection of gas turbines, the adaptability of the electrical and thermal loads of the gas turbine should be met to ensure high operating efficiency in the full load range, especially under common loads. In the common load range of gas turbine operation, the gas turbine should be able to maintain low heat consumption and high efficiency operating conditions.

　　6.應根據負荷需要選擇技術成熟的主流燃機機型，充分利用現有投產燃氣機組的運行經驗和備件積累優勢，加強技術交流，降低運行維護成本。

　　6. Mainstream gas turbine models with mature technology should be selected according to load requirements, fully utilizing the operational experience and spare parts accumulation advantages of existing gas turbine units, strengthening technical exchanges, and reducing operation and maintenance costs.

　　7.應充分考慮整套燃氣-蒸汽聯合循環系統的性價比，關注機組運行性能、投產后的經濟效益、單位造價和后期維護成本。

　　7. The cost-effectiveness of the entire gas steam combined cycle system should be fully considered, focusing on the operational performance of the unit, the economic benefits after commissioning, the unit cost, and the maintenance cost in the later stage.

　　8.對于采用新技術，可能會對安全性有較大影響的沼氣發電機組，因其未經長時間的試驗驗證和考核，應慎重選擇。

　　8. For biogas generator sets that may have a significant impact on safety due to the adoption of new technologies, careful selection should be made as they have not undergone long-term testing and assessment.

　　9.燃機設備選型應考慮設備國產化進展情況，國產化率較高的機組具備設備價格、技術服務等多方面的優勢，合理選擇國產化率較高的機組有利于我國燃機行業的快速發展。

　　9. The selection of gas turbine equipment should consider the progress of equipment localization. Units with high localization rates have advantages in equipment prices, technical services, and other aspects. Reasonable selection of units with high localization rates is conducive to the rapid development of China's gas turbine industry.

　　10.安裝于北部地區的燃氣機組應根據需要配備空氣加熱裝置，防止進氣溫度過低；南方機組選型應考慮燃機在夏季工況的帶負荷能力，可根據需要和經濟性論證情況選擇安裝進氣降溫裝置。

　　10. Gas turbines installed in northern regions should be equipped with air heating devices as needed to prevent low intake temperatures; The selection of southern units should consider the load capacity of the gas turbine under summer operating conditions, and the installation of intake cooling devices can be selected according to the needs and economic feasibility.

　　11.對于熱電聯產機組，為保證機組啟動的靈活性，優先采用燃機、汽輪機分軸布置方式。

　　11. For cogeneration units, in order to ensure the flexibility of unit start-up, the arrangement of separate shafts for gas turbine and steam turbine is preferred.

　　（二）燃機機型及特點

　　（2） Gas turbine models and characteristics

　　在機組供能方式確定后，合理選擇燃機設備是保證電廠安全穩定運行的關鍵，在燃機設備技術發展中，主要有大型重型發電用燃機和航改燃小型工業燃機形式。發電用重型燃機廠家主要有安薩爾多、GE、三菱和西門子等，各廠燃機制造技術存在一定的差異，形成了不同的技術特點。各個廠家燃機設備原理基本相同，但燃機的設備結構、系統組成等存在一定差異。

　　After determining the power supply mode of the unit, the reasonable selection of gas turbine equipment is the key to ensuring the safe and stable operation of the power plant. In the development of gas turbine equipment technology, there are mainly large-scale heavy-duty power generation gas turbines and small-scale industrial gas turbines converted from aviation to fuel. The main manufacturers of heavy-duty gas turbines for power generation are Ansaldo GE、 Mitsubishi and Siemens, among others, have certain differences in their gas turbine manufacturing technologies, resulting in different technical characteristics. The principles of gas turbine equipment from various manufacturers are basically the same, but there are certain differences in the equipment structure and system composition of gas turbines.

　　1.上海電氣安薩爾多燃機

　　1. Shanghai Electric Ansaldo gas turbine

　　1.1上海電氣安薩爾多常用的F級機組為AE94.3型燃氣機組，性能指標先進，該型機組在國內已有較多的應用，可用于供熱和純凝工況機組選用。

　　1.1 The F-class unit commonly used by Shanghai Electric Ansaldo is the AE94.3 gas unit, which has advanced performance indicators. This type of unit has been widely used in China and can be selected for heating and pure condensing conditions.

　　1.2 上海電氣安薩爾多H級機組為GT36-S5型燃氣機組，采用原阿爾斯通燃機設計方案，性能指標先進。

　　1.2 The Ansaldo H-class unit of Shanghai Electric is a GT36-S5 gas turbine unit, which adopts the original Alstom gas turbine design scheme and has advanced performance indicators.

　　1.3 安薩爾多燃氣機組可適用同軸、分軸布置形式，汽輪機、發電機由上海電氣統一配套。

　　1.3 Ansaldo gas turbine units can be arranged in coaxial or split axis configurations, and the steam turbine and generator are uniformly matched by Shanghai Electric.

　　1.4 安薩爾多燃機指標較為先進，上海電氣承擔部套維修工作，在燃機技術服務方面相對完善，備品備件供應可靠。

　　1.4 Ansaldo gas turbine has relatively advanced indicators, and Shanghai Electric undertakes component maintenance work, providing relatively complete technical services for gas turbines and reliable supply of spare parts.

　　1.5 上海電氣的安薩爾多燃機設備國產化率最高，已逐步開展燃機核心部件的生產制造業務。

　　Shanghai Electric's Ansaldo gas turbine equipment has the highest localization rate and has gradually started the production and manufacturing of core components for gas turbines.

　　2.哈電集團、南汽GE機組

　　2. Harbin Electric Power Group and Nanqi GE units

　　2.1哈電集團GE公司F級機組為9F.04/9F.05/9F.06（9FB）型燃氣機組，性能指標先進，該型機組在國內已有較多的應用，可用于供熱和純凝工況機組選用。

　　2.1 The F-class unit of Harbin Electric Group GE Company is a 9F.04/9F.05/9F.06 (9FB) gas unit with advanced performance indicators. This type of unit has been widely used in China and can be used for heating and pure condensing conditions.

　　2.2 哈電集團GE公司H級機組為9HA.01、9HA.02型燃氣機組，性能指標先進。

　　2.2 The H-class units of Harbin Electric Group GE Company are 9HA.01 and 9HA.02 gas turbines with advanced performance indicators.

　　2.3 南汽和GE公司合作生產9E級、6F級中小型燃氣機組，在國內有較多的應用。

　　2.3 Nanqi and GE cooperate to produce 9E and 6F small and medium-sized gas turbines, which have been widely used in China.

　　2.3 GE燃氣機組可適用同軸、分軸布置形式，汽輪機、發電機一般由哈電集團或南汽統一配套。

　　2.3 GE gas turbine units can be arranged in coaxial or split axis configurations, and steam turbines and generators are generally provided by Harbin Electric Power Group or Nanjing Automobile Group.

　　2.4 GE公司燃機指標較為先進，哈電集團、南汽承擔燃機部套的維修工作，在燃機技術服務方面有一定便利條件，備品備件供應可靠。

　　2.4 GE's gas turbine indicators are relatively advanced, and Harbin Electric Power Group and Nanqi undertake the maintenance work of gas turbine components, providing certain convenient conditions in gas turbine technical services and reliable supply of spare parts.

　　2.5GE燃機設備國產化率較高，已逐步開展燃機核心部件的生產制造業務。

　　The localization rate of 2.5GE gas turbine equipment is relatively high, and the production and manufacturing of core components of gas turbines have gradually been carried out.

　　3.東方電氣三菱機組

　　3. Dongfang Electric Mitsubishi Unit

　　3.1東方電氣三菱公司F級機組為M701F3、M701F4、M701F5（采用了部分H級先進技術）型燃氣機組，性能指標先進，該型機組在國內已有較多的應用，可用于供熱和純凝工況機組選用。

　　3.1 Dongfang Electric Mitsubishi's F-class units are M701F3, M701F4, and M701F5 (using some advanced H-class technologies) gas-fired units with advanced performance indicators. This type of unit has been widely used in China and can be used for heating and pure condensing conditions.

　　3.2 東方電氣三菱公司H級機組為M701J型燃氣機組，性能指標較為先進。

　　3.2 The H-class unit of Dongfang Electric Mitsubishi Company is an M701J gas turbine unit with advanced performance indicators.

　　3.3 三菱公司燃氣機組可適用同軸、分軸布置形式，汽輪機、發電機由東方電氣統一配套。

　　3.3 Mitsubishi gas turbine units can be arranged in coaxial or split shaft configurations, and the steam turbine and generator are uniformly matched by Dongfang Electric.

　　3.4 三菱公司燃機指標較為先進，在燃機技術服務方面有一定便利條件，備品備件供應可靠。

　　3.4 Mitsubishi's gas turbine indicators are relatively advanced, and it has certain convenient conditions in gas turbine technology services, with reliable supply of spare parts.

　　4.4 西門子公司燃機指標較為先進，由于國內無合作單位，備品備件需從國外采購。

　　4.4 Siemens' gas turbine indicators are relatively advanced, and due to the lack of cooperative units in China, spare parts need to be purchased from abroad.

　　五、燃機配套設備

　　5、 Gas turbine supporting equipment

　　1.燃氣發電項目汽輪機、發電機等機島設備一般隨燃機一起供貨，對系統完整性和投產后的經濟性起著重要作用，必須保證配套設備的良好性能和安全可靠。

　　1. Gas power generation projects generally supply turbine, generator and other turbine island equipment together with the gas turbine, which plays an important role in the integrity of the system and the economy after production. It is necessary to ensure the good performance, safety and reliability of the supporting equipment.

　　表7 燃機及輔機廠商配選表

　　Table 7 Selection Table of Gas Turbine and Auxiliary Equipment Manufacturers

　　燃機廠商

　　Gas turbine manufacturer

　　國內配套汽輪機、發電機廠商

　　Domestic manufacturers of supporting steam turbines and generators

　　GE

　　GE

　　南汽（9E，6F）、哈電集團（9F級以上）

　　Nanqi (9E, 6F), Harbin Electric Group (9F or above)

　　西門子

　　Siemens

　　西門子中國

　　Siemens China

　　安薩爾多

　　Ansaldo

　　上電集團

　　Shangdian Group

　　日本三菱

　　Mitsubishi, Japan

　　東方電氣

　　Dongfang Electric

　　2.汽輪機設備根據運行實際情況合理選擇一拖一或二拖一的組合方式。一拖一組合汽輪機容量較小，效率較低，但靈活性較好；二拖一組合汽輪機容量較大，高負荷下效率較高，但靈活性較差。

　　2. The combination of one to one or two to one shall be reasonably selected for the steam turbine equipment according to the actual operating situation. The one to one combination turbine has a smaller capacity and lower efficiency, but has better flexibility; The two to one combination steam turbine has a large capacity and high efficiency under high loads, but its flexibility is poor.

　　3.余熱鍋爐設備一般為單獨供應商供貨，與燃機、汽機設備進行銜接，為保證余熱鍋爐的匹配性能，應通過完善的熱平衡聯合計算保證蒸汽循環系統的合理性和經濟性。

　　3. Waste heat boiler equipment is generally supplied by a separate supplier and connected with gas turbine and steam turbine equipment. To ensure the matching performance of the waste heat boiler, a comprehensive heat balance joint calculation should be carried out to ensure the rationality and economy of the steam cycle system.

　　表7 常見燃機和余熱鍋爐廠商配選表

　　Table 7: Selection of Common Gas Turbine and Waste Heat Boiler Manufacturers

　　燃機廠商

　　Gas turbine manufacturer

　　國內配套余熱鍋爐廠商

　　Domestic supporting waste heat boiler manufacturers

　　GE

　　GE

　　哈電集團、杭鍋、無錫華光等

　　Harbin Electric Group, Hangguo, Wuxi Huaguang, etc

　　西門子

　　Siemens

　　杭鍋、無錫華光等

　　Hangguo, Wuxi Huaguang, etc

　　安薩爾多

　　Ansaldo

　　上電集團、杭鍋、無錫華光等

　　Shangdian Group, Hangguo, Wuxi Huaguang, etc

　　日本三菱

　　Mitsubishi, Japan

　　東方電氣、杭鍋、無錫華光等

　　Dongfang Electric, Hangguo, Wuxi Huaguang, etc

　　3.配套設備應與燃機主機設備具備相當的使用壽命，并保證安全經濟性能在合理的使用壽命期內滿足要求。

　　3. The supporting equipment should have a comparable service life to the main equipment of the gas turbine, and ensure that the safety and economic performance meet the requirements within a reasonable service life.

　　六、聯合循環設備現場布置

　　6、 On site layout of combined cycle equipment

　　1.根據燃氣發電項目的實際情況選擇燃機、汽輪機和發電機、余熱鍋爐等主機設備的布置方式，設備布置兼顧設備安裝和檢修維護需要。

　　1. Choose the layout of main equipment such as gas turbines, steam turbines, generators, and waste heat boilers based on the actual situation of the gas-fired power generation project, taking into account the needs of equipment installation and maintenance.

　　2.對于熱電聯產燃氣機組，考慮機組供熱和運行靈活性，優先選擇燃機、汽輪機分軸布置方式，以保證在汽輪機出現故障時的供熱需要。

　　2. For cogeneration gas-fired units, considering the flexibility of unit heating and operation, priority should be given to the arrangement of separate shafts for gas and steam turbines to ensure the heating needs in case of turbine failure.

　　3.對于發電調峰用沼氣發電機組，燃機、汽輪機可采用更為緊湊的同軸布置方式，系統相對簡單，占地面積較小，投資費用較低。

　　3. For biogas generators used for peak shaving power generation, the gas turbine and steam turbine can be arranged in a more compact coaxial manner, with a relatively simple system, smaller footprint, and lower investment costs.

　　4.燃機、汽機等主設備可采用高位或低位布置方式，可根據場地和造價情況等因素進行綜合評估后選擇。

　　4. The main equipment such as gas turbines and steam turbines can be arranged in a high or low position, and can be selected after comprehensive evaluation based on factors such as site and cost.

　　七、燃機技術路線和設備選擇步驟

　　7、 Technical roadmap and equipment selection steps for gas turbines

　　1.根據區域能源需求現狀和近期、遠期規劃并考慮裕量。

　　1. Based on the current state of regional energy demand and short-term and long-term planning, and considering margin.

　　2.確定用能的種類和供能方式。

　　2. Determine the type of energy used and the method of energy supply.

　　3.確定采用熱電聯產、調峰或分布式技術類型。

　　3. Determine the type of cogeneration, peak shaving, or distributed technology to be adopted.

　　4.確定燃機設備的容量及數量。

　　4. Determine the capacity and quantity of gas turbine equipment.

　　5.燃機設備選型。

　　5. Selection of gas turbine equipment.

　　6.燃機配套汽輪機、發電機設備選擇。

　　6. Selection of matching steam turbine and generator equipment for gas turbine.

　　7.余熱鍋爐及其輔機設備選擇。

　　7. Selection of waste heat boiler and its auxiliary equipment.

　　本文由  沼氣發電機組 友情奉獻.更多有關的知識請點擊  http://www.szxfaq.cn/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from a biogas generator set For more related knowledge, please click http://www.szxfaq.cn/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Stay tuned